ARTICLE VIDEO

68_Sync Settings for Live Performance_CUBASE

Advanced Cubase TutorialsPublished 2013.03.17Updated 2026.07.17
Read article ↓

When performing live with Cubase, sync settings are essential for reproducing songs made in a DAW on stage. This article explains a concrete way to use an audio interface and a headphone amp to manage the PA mix for the audience and the monitoring for performers separately. By setting up multiple stereo outputs in VST Connections and planning your track routing, you can control the backing track and the click metronome independently, and handle multiple songs and tempo changes in a live set.

Using Cubase Live

A DAW broadens the instruments and techniques you can use.
The problem, however, is that you cannot reproduce it live.

The solution is to bring a laptop and sync with it.

Tracks that cannot be covered by live performers or your lineup are sent to the PA and played directly.

Here, we will explain how to set up a synced live performance.

Since many of you probably use Cubase Artist,
we will proceed without using the Control Room in this explanation.

Equipment Needed for Syncing

First, let's check the equipment you need for syncing.

Audio Interface

You need two stereo outputs.
In this explanation, we use "Output 1-2" and "Output 3-4."

About Choosing an Audio Interface

Headphones

Performers need these to hear the backing track and metronome.
Any model is fine as long as you can hear the sound clearly.

Headphone Amp

This device sits between the audio interface and the headphones.
It lets you control the monitor volume to suit the situation.

Track Routing for Syncing

So that the live performance and the backing track stay together,
whoever handles the rhythm, such as the drummer, listens to the metronome.

However, if you just play the metronome normally, the audience will hear it (lol).
So we set things up to get around this.

Backing track

First, import the 2-mix backing track you will use live.
We will use this 2-mix for the explanation.

It is also fine if the backing track is split into separate tracks.

VST Connections

From the menu bar, select "Devices" → "VST Connections."

VST Connections

Check whether there are two or more stereo outputs.

If there is only one stereo output, click "Add Bus" to add more outputs.

Mix master

The outputs you set up above are displayed.

Output

Check that the backing track's output is set to "Stereo Out".

Send

Send it via a send to "Stereo Out 2".

Now the backing track feeds both Stereo Outs.
Let's give each Stereo Out a name.

Track names

We named them "Audience (Stereo Out)" and "Performers (Stereo Out 2)."

Finally, set up the metronome.

Metronome

Program the metronome with percussion or drum sounds.

Output settings-1

Open the MixConsole and go to "Routing."
Change the output of the software synth you programmed to "Performers".

That's it.

Connect the audio interface's "Out 1-2" to the PA (audience) and
"Out 3-4" to the headphone amp so the performers can monitor.

Volume balance issues such as "the backing track is too quiet" or "the click is too loud"
can be controlled individually by adjusting each track.

Possible Problems

Here are possible problems with the setup above and ways to improve it.

I want to adjust individual tracks rather than a 2-mix

Individual volumes

It is easy.
Send every track to "Performers" with a send.

Performers can also monitor only the tracks they need.

What about playing multiple songs?

Songs

Line up the songs on the timeline.

Also, if you are allowing time for talking between songs (MC),
it is best for one band member to handle play and stop.

The tricky part is the metronome,
because each song has a different tempo.

Set the tempo using the settings in the following article.

"Changing tempo and time signature within a song"
https://sleepfreaks-dtm.com/for-advance-cubase/tempo-4/

With this setting, the metronome you programmed above automatically follows the tempo.

What about the count-in?

Performers can monitor the metronome at all times,
so to allow for this, move the region later and the problem is solved.

Range

I want several people to monitor the click

Connect the sound coming out of "Out 3-4" to a device that lets several people monitor.

I'm worried the computer will stop

It is impossible to guarantee 100% that it will never stop,
but setting the buffer size to a higher value reduces the CPU load
and lowers the risk of it stopping.


Frequently asked questions

Q1. When using Cubase live, how do I set up a click metronome that the audience cannot hear?

Create the metronome on a separate track and use the MixConsole's routing to send it only to the output bus for the performers. Send the backing track to the output bus for the audience, and the two are kept separate.

Q2. How many outputs does my audio interface need?

You need at least two stereo outputs (four channels in total): one pair for the audience PA and the other for performer monitoring.

Q3. When playing multiple songs with different tempos, how do I handle the click?

Use Cubase's tempo settings to set the tempo for each song on the timeline. The metronome follows automatically, so no manual adjustment is needed.

Q4. How can I reduce the risk of the computer stopping during a show?

Setting the audio interface's buffer size to a higher value reduces the CPU load and lowers the risk of a crash.