ARTICLE VIDEO

58_Using Dithering to Minimize Quality Loss_Logic Pro

Advanced Logic Pro TutorialsPublished 2012.07.07Updated 2026.07.17
Read article ↓

Setting up dithering correctly in Logic Pro keeps loss of sound quality to a minimum when converting to 16-bit. This article explains practical mastering techniques, from choosing the bit depth in Preferences and setting dithering when bouncing, to the important point of setting the limiter or maximizer Ceiling to -0.1 dB. Following these steps lets you export audio files of release quality.

Using Dithering in Logic

This article branches off from "Dithering" in the Mix category.

Bit depth

In Logic, you can choose the bit depth in "Preferences" → "Audio."
If you uncheck it, the bit depth becomes 16-bit.

The bit depth you choose here is used within the project.

Bounce

In the normal Bounce window, choose the bit depth you want (16-bit),
and change "Dithering" to "UV22HR."

Here is a point to watch at this stage.

Limiter or maximizer

The "Ceiling" of your limiter or maximizer
must be set to "-0.1 dB." Otherwise, the sound may distort.

It is simple, but it is a dithering step you should always do.

Dithering Explained


Logic Pro

Download on the Mac App Store


Frequently asked questions

Q1. What is the main purpose of dithering in Logic Pro?

Dithering is a process that reduces the quantization noise produced when converting from a higher bit depth (such as 24-bit) to 16-bit, minimizing loss of sound quality. It is an especially important step at the very end of mastering.

Q2. Why choose UV22HR when bouncing?

UV22HR is a dithering algorithm developed by Apogee. When converting to 16-bit, it shifts the noise into frequency ranges the human ear has difficulty hearing, giving you high-quality audio files.

Q3. What happens if I don't set the Ceiling to -0.1 dB?

If the Ceiling is too high, peaks are not held back enough and the sound can distort, greatly degrading the final sound quality. Always set it to -0.1 dB or lower.

Q4. At what stage should dithering be done?

Dithering is best done at the very end of mastering, in the bounce just before exporting the song as an MP3 or for CD.