You need to be careful when using USB hubs for DTM production. USB hubs are convenient, but it is important to connect your audio interface directly to a USB port on your computer. Connecting through a hub can cause problems such as degraded sound quality, insufficient power, and startup failures. USB keyboards, on the other hand, work fine through a hub, while external hard drives perform better when connected directly if you have a free port. Understanding the correct way to connect lets you build a stable production environment and get the most out of your equipment.
A Trap Hidden in Convenience
A USB hub lets you add more ports when you do not have enough.
Very convenient, right?
I rely on one every day, but
there is one thing to watch out for.
Do Not Connect Your Audio Interface Through a USB Hub
- Sound quality may degrade
- The interface cannot perform at its full power
- It may not even start up
There are many such drawbacks.
Most computers have two or more USB ports,
so use one for your audio interface and use a USB hub on the remaining ports!!
By the way, USB keyboards are fine on a USB hub.
External USB hard drives perform better when plugged directly into the computer if you have a free port.
Take a moment to check your setup.
Frequently asked questions
Q1. Why shouldn't I connect my audio interface to a USB hub?
Through a USB hub, the interface may not receive enough power, which can cause degraded sound quality or device recognition problems. Connecting it directly to a USB port on your computer gives the best performance.
Q2. Is it OK to connect USB or MIDI keyboards to a hub?
Yes, USB and MIDI keyboards work fine through a hub. Unlike audio interfaces, their power requirements are low, so you can use a USB hub to increase the number of ports.
Q3. Is there a recommended way to connect an external hard drive?
If your computer has a free USB port, we recommend connecting the external hard drive directly. Data transfer is faster than through a hub, and you can expect higher performance.













